TO APPLY

Five simple steps for a smooth, lasting application.

  1. CLEAN & DRY

    Clean the application surface and let it dry completely. If it is safe for your surface, a final wipe with rubbing alcohol helps remove oils.

  2. PEEL THE BACKING

    Turn the decal face down. Slowly peel the paper backing away at a low angle, making sure every vinyl piece stays on the clear transfer tape.

  3. ALIGN & PRESS

    Position the decal over the surface. Once it is aligned, lower it gently from one edge and press it into place.

  4. SMOOTH & BURNISH

    Use a scraper or sturdy card to rub firmly over the entire design, working from the center outward or from top to bottom.

  5. REMOVE TRANSFER TAPE

    Starting at one corner, slowly peel the clear transfer tape back over itself at a low angle.

Vinyl lifting?

Lay the tape back down and rub that spot firmly; then peel again slowly at a low angle.

Give it time
to cure

Wait at least 24 hours before washing or getting the decal wet. For drinkware and other washable items, gentle hand-washing will help it last.

Final Step: Enjoy your new flare!
And feel free to reach out if you're interested in anything else